2003 TOYOTA TACOMAVIN: 5TEWN72NX3Z167368
Historical Records
Outer tie rod(s) replaced
Alignment performed
VIN Factory Options
Vehicle Equipment
- Driver Air Bag
- Passenger Air Bag
- Passenger Air Bag On/Off Switch
- AM/FM Stereo
- Cassette
- ABS
- Front Disc/Rear Drum Brakes
- Power Outlet
- Four Wheel Drive
- V6 Cylinder Engine
- Gasoline Fuel
- Tow Hooks
- Cloth Seats
- Power Steering
- Tires - Front All-Season
- Tires - Rear All-Season
- Conventional Spare Tire
Equipment Details
- 121.9" wheelbase
- 18.5 gallon fuel tank w/lockable fuel filler door & gas cap holder
- 2-speed transfer case
- 3.4L DOHC EFI 24-valve V6 engine
- 3.91 axle ratio
- 4-wheel drive w/4WDemand system
- 5100# GVWR
- 6.2' double-wall box
- Front stabilizer bar
- Front tow hook
- Full-size spare tire
- HD battery
- Independent coil-spring double-wishbone front suspension w/gas-filled shock absorbers
- Pwr rack & pinion steering
- Pwr ventilated front disc/rear drum brakes w/rear load-sensing proportioning valve
- Rear leaf-spring suspension w/staggered gas-filled shock absorbers
- Skid plates-inc: front suspension, transfer case, fuel tank
- Aerodynamic multi-reflector halogen headlamps
- Black painted rear bumper
- Dual black outside mirrors (RH convex)
- Front/rear mudguards
- Mist-cycle windshield wipers
- Tilt-out rear quarter windows
- Tinted windshield glass
- Dual aux pwr outlets
- Dual cup holders
- Forward-facing rear jump seats
- Full carpeting
- Gauges-inc: speedometer, odometer, fuel level
- Sculpted door trim w/cloth inserts, dual armrests, map pockets
- 3-point seat belts w/adjustable shoulder belt anchors at outboard positions & center lap belt
- Driver/front passenger airbag supplemental restraint system (SRS)
- Rear child restraint system
- Side-door impact beams
Chassis
- Brake ABS System - Four-Wheel
- Brake Type - Pwr-Assisted
- Disc - Front (Yes or ) - Yes
- Drum - Rear (Yes or ) - Yes
- Front Brake Rotor Diam x Thickness - 11.6 x 0.87 in
- Rear Drum Diam x Width - 11.6 x - TBD - in
- Frame Type - Ladder
- Fuel Tank Capacity, Approx - 18.5 gal
- Fuel Tank Location - Midship
- Steering Ratio (:1), At Lock - 3.5
- Steering Ratio (:1), On Center - 19.4
- Steering Type - Pwr Rack & Pinion
- Turning Diameter - Curb to Curb - 40.0 ft
- Axle Ratio (:1) - Front -
- Axle Ratio (:1) - Rear -
- Axle Type - Front - Hypoid
- Axle Type - Rear - Hypoid
- Shock Absorber Diameter - Front - mm
- Shock Absorber Diameter - Rear - mm
- Stabilizer Bar Diameter - Front - 1.02 in
- Suspension Type - Front - Double-Wishbone
- Suspension Type - Rear - Leaf Spring
- Revolutions/Mile @ 45 mph - Front - Rev/Mile
- Revolutions/Mile @ 45 mph - Rear - Rev/Mile
- Revolutions/Mile @ 45 mph - Spare - Rev/Mile
- Dead Weight Hitch - Max Tongue Wt. - lbs
- Dead Weight Hitch - Max Trailer Wt. - lbs
- Curb Weight - Front - lbs
- Curb Weight - Rear - lbs
- Gross Combined Wt Rating - 9000 lbs
- Gross Vehicle Weight Rating Cap - 5100 lbs
Dimensions
- Cargo Box (Area) Height - 15.9 in
- Cargo Box Length @ Floor - 74.5 in
- Cargo Box Width @ Floor - in
- Cargo Box Width @ Top, Rear - in
- Cargo Box Width @ Wheelhousings - 40.9 in
- Cargo Volume - ft³
- Ext'd Cab Cargo Volume - 15.0 ft³
- Ground Clearance, Front - in
- Ground Clearance, Rear - in
- Height, Overall - in
- Length, Overall w/o rear bumper - 202.9 in
- Overhang, Front - 31.5 in
- Overhang, Rear w/o bumper - 48.8 in
- Wheelbase - 121.9 in
- Width, Max w/o mirrors - 66.5 in
- Front Head Room - 38.7 in
- Front Hip Room - 49.6 in
- Front Leg Room - 42.8 in
- Front Shoulder Room - 53.9 in
- Passenger Capacity -
- Second Head Room - 34.8 in
- Second Hip Room - 48.8 in
- Second Leg Room - 27.2 in
- Second Shoulder Room - 52.3 in
Powertrain
- Total Cooling System Capacity - qts
- Cold Cranking Amps @ 0° F (Primary) - 356
- Maximum Alternator Capacity (amps) - 70
- Maximum Alternator Watts - 1050
- Displacement - 3.4L/208
- Engine Type - Gas V6
- Fuel System - EFI
- SAE Net Horsepower @ RPM - 190 @ 4800
- SAE Net Torque @ RPM - 220 @ 3600
- EPA Fuel Economy Est - City - MPG
- EPA Fuel Economy Est - Hwy - MPG
- Clutch Size - in
- Drivetrain - Four Wheel Drive
- Fifth Gear Ratio (:1) -
- First Gear Ratio (:1) -
- Fourth Gear Ratio (:1) -
- Reverse Ratio (:1) -
- Second Gear Ratio (:1) -
- Third Gear Ratio (:1) -
- Trans Type -
- Transfer Case Gear Ratio (:1), High - 1.00
- Transfer Case Gear Ratio (:1), Low - 2.57
Summary
- Body Code - 121.9
- Body Style - Xtracab
- Vehicle Name - Toyota Tacoma
Vehicle
- Country of Origin - United States Toyota Trucks
| Year | 2003 |
| Title | Hidden text |
| ODO | 7847 mi (Hidden text) |
| Loss | Hidden text |
| Damage | Hidden text |
| Estimated Retail Value | $6270 |
| Estimated Repair Cost | $1760 (405%) |
| Seller | Hidden text |
| Location | Missoula, MT, 59808 |
| Date | ended 5 years ago sold for $4286 |
| Sale Website Type | salvage or insurance auction |
| Color | Green |
| Transmission | Manual |
| Engine | 3.4L V6 FI DOHC 24V F4 |
| Cylinders | 6 Cyl |
| Drive | Four Wheel Drive |
| Fuel Type | Gasoline |
Model Analytics & Market Report
Depreciation
| Year | Average Mileage | Average Price | % Left | % Lost | ||
|---|---|---|---|---|---|---|
| 2003 MSRP | 0 mi | $37,100 | — | — | 100% | 0% |
| 2003 | 10,570 mi | $46,893 | −$9,793 | −26.4% | 126.4% | -26.4% |
| 2004 | 21,140 mi | $40,971 | +$5,922 | +12.63% | 110.43% | -10.43% |
| 2005 | 31,710 mi | $37,742 | +$3,229 | +7.88% | 101.73% | -1.73% |
| 2006 | 42,280 mi | $36,250 | +$1,492 | +3.95% | 97.71% | 2.29% |
| 2007 | 52,850 mi | $34,888 | +$1,362 | +3.76% | 94.04% | 5.96% |
| → Visit 2003 TOYOTA TACOMA depreciation page to see full data. | ||||||
Price vs Mileage
| Mileage | Average Price | Sample Size |
|---|---|---|
| 25,000 mi | $23,990 | 10 sales |
| 35,000 mi | $13,989 | 19 sales |
| 40,000 mi | $16,800 | 15 sales |
| 45,000 mi | $17,999 | 11 sales |
| 50,000 mi | $16,595 | 25 sales |
| 55,000 mi | $19,950 | 23 sales |
| → Visit 2003 TOYOTA TACOMA depreciation page to see full data. | ||
VIN Decoder — 33 records
Cooling type defines the cooling system used to control the engine temperature. It can be either air-cooled or water-cooled.
Engine displacement (in cubic centimeters) is the volume swept by all the pistons inside the cylinders of a reciprocating engine in a single movement from top dead center to bottom dead center.
Engine displacement (in cubic inches) is the volume swept by all the pistons inside the cylinders of a reciprocating engine in a single movement from top dead center to bottom dead center.
Engine displacement (in liters) is the volume swept by all the pistons inside the cylinders of a reciprocating engine in a single movement from top dead center to bottom dead center.
Engine brake is the horsepower (hp) at the engine output shaft. Engine Brake (hp) From is the lower value of the range.
Engine brake is the horsepower (hp) at the engine output shaft. Engine Brake (hp) To is the upper value of the range.
Engine configuration defines how engine cylinders are arranged. Common values are V6 for V-shaped arrangement, I4 or L4 for in-line arrangement.
Body Class presents the body type based on 49 CFR 565.12(b): "Body type means the general configuration or shape of a vehicle distinguished by such characteristics as the number of doors or windows, cargo-carrying features and the roofline (e.g., sedan, fastback, hatchback)." Definitions are not provided for individual body types in the regulation.
Gross vehicle weight rating (GVWR) is the maximum operating weight of a vehicle including the vehicle's chassis, body, engine, engine fluids, fuel, accessories, driver, passengers and cargo, but excluding that of the trailers. Per 49 CFR 565.15, Class 1 is further broken down to Class A-D; Class 2 is further broken down to Class E-H. This field captures the lower bound of GVWR range for the vehicle.
Cab type applies to both pickup truck and other medium- and heavy-duty trucks. The cab or cabin of a truck is the inside space in a truck where the driver is seated. For pickup trucks, the cab type is categorized by the combination number of doors and number of rows for seating. For medium- and heavy-duty trucks (MDHD), the cab type is categorized by the relative location of engine and cab.
For pickup trucks, there are four cab types.
- Regular: 2 door, 1 row of seats
- Extra/Super/Quad/Double/King/Extended: 2 doors, 2 rows of seats
- Crew/Super Crew/Crew Max: 4 doors, 2 rows of seats
- Mega: 4 doors, 2 rows of seats (with a bigger cabin than crew cab type)
For medium- and heavy-duty (MDHD) trucks, there are several categories as listed below.
- Cab Beside Engine
- CAE: Cab Above Engine
- CBE: Cab Behind Engine
- COE: Cab Over Engine or Flat Nose: Driver sits on top of the front axle and engine
- LCF: Low Cab Forward
- Conventional: Driver sits behind the engine
- Non-Tilt
- Tilt
Per 49 CFR 565, Model means a name that a manufacturer applies to a family of vehicles of the same type, make, line, series and body type.
If the model year (MY) is supplied when the VIN is decoded, such as from a crash report or a vehicle registration record, the MY value will be the supplied MY, even if the MY decoded from the VIN differs from the supplied MY. If the MY is not supplied when the VIN is decoded, the MY value will be decoded from the 10th character in the VIN.
Note is used to store any additional information that does not correspond to any of the specified fields on the interface. This is a catch-all element for systems other than for engine, restraint system, brake and battery. Engine, restraint system, brake, and battery have their own note elements.
Note is used to store any additional information that does not correspond to any of the specified fields on the interface. This is a catch-all element for systems other than for engine, restraint system, brake and battery. Engine, restraint system, brake, and battery have their own note elements.
This data element captures the city of the manufacturing plant where the manufacturer affixes the VIN.
This data element captures the name of the company that owns the manufacturing plant where the manufacturer affixes the VIN.
This data element captures the country of the manufacturing plant where the manufacturer affixes the VIN.
This data element captures the State or Province name within the Plant Country of the manufacturing plant where the manufacturer affixes the VIN.
Per 49 CFR 565, Series means a name that a manufacturer applies to a subdivision of a "line" denoting price, size or weight identification and that is used by the manufacturer for marketing purposes.
Testimonials from our customers
